Nokia X2 Ringer Speaker Problem Solution Ways Jumpers
If the ring tone problem in Nokia x2 SOND quality is too low or poor voice quality in Ringer Nokia x2 you can solve this problem easily with this schedule that is posted with this first step post.
in ringer to checked, so if it shows little or poor voice continuity put this ring as it does not show continuity ringer does not work and changing damage.after ringer ok you might not vote, these two main points ring is connected to the board control chart can be found in these two prints in red and blue lines on the screen lines.both two different paths.you should also check these links with the meter and if one of them is broken or damaged, you can easily can jumper, as defined in diagram.
for more detail and new tips and tricks about this problem keep visiting this page we will update it timely with new diagrams.some related post are also given bellow you can read them also for more information.
to get new repairing diagrams and applications with email “Enter your email address for RSS:” at the right side at top and press “subscribe”
You May Like Alsoا
Incoming search terms:nokia x2-02 keypad solution
nokia x2 ringer solution
nokia x2 speaker problem
nokia x2-01 ringer solution
nokia x2-02 ringer solution
nokia x2-02 ringer problem
nokia x2-02 speaker problem
nokia x2-01 speaker problem
nokia x2 ringer problem
nokia x2-00 speaker problem
Disclaimer.We are not affiliate with cell phone companies like Nokia,Samsung,Sony Ericsson,Lg,Motorolo and some other etc Manufacturers / Vendors .All trademarks are the property of the respective trademark owners.we just provide diagrams for study and repairing purpose.these images are uploaded by website visitors.so we will not be responsible for any loss or damage, including personal injury.for more detail read Terms & Conditions and Privacy & Policies at bottom.
Restore Hard reset will set your phone in origional factorry settings. It will remove all the data and apps that you installed. Your contacts will be removed and you have to add them again.