Nokia C2-03 Voluem Up Down Keys Not Working Problem Solution Jumpers
Posted in Nokia C2-03 with on December 18, 2012
1-Nokia C2-03 Volume Up Key is Not Working.
2-Nokia C2-03 Volume Down Key is Not Working.
1-Hot Air is required.
2-Solding iron is required.
3-Skrue driver keys.
5-Four leg On of Switch ( Volume Key Switch ).
6-old board of Nokia C2-03 if a few parts are damage in this board.So that they can be replaced.
If Volume Up or Down key is not working in Nokia C2-03 then it can be the cause of Volume Switch or Resistance near by it.
So disassemble mobile phone and check whole mother board.
If there is some rust or carbon clean it with electronics cleaner and apply some heat so that it can be dry.
Check these tracks as shown in red and green lines in above diagram.
If some prints are missing or a few parts are damage apply jumpers or replace damaged parts.
If Volume Switch is damage or broken then replace it with new one.
Do not apply much heat it can be harm for your skin and mobile phone.
Try that board get fully dry.
When you are removing old volume switch make sure you will not damage prints from mother board so remove it when solding iron is too much hot.Or remove it with hot air.
You May Like Alsoا
Incoming search terms:nokia c2-03 volume key solution
nokia c2-03 volume key jumper
nokia c2-03 volume key ways
nokia c2-03 volume switch not working
c2-03 volume up key not working
nokia c2 03 volume keypad not working
C2-03 volume switch ways
nokia c2 03 volume keypad solution
nokia c203 volume key not working
nokia c2-03 volume key not working
Disclaimer.We are not affiliate with cell phone companies like Nokia,Samsung,Sony Ericsson,Lg,Motorolo and some other etc Manufacturers / Vendors .All trademarks are the property of the respective trademark owners.we just provide diagrams for study and repairing purpose.these images are uploaded by website visitors.so we will not be responsible for any loss or damage, including personal injury.for more detail read Terms & Conditions and Privacy & Policies at bottom.
Restore Hard reset will set your phone in origional factorry settings. It will remove all the data and apps that you installed. Your contacts will be removed and you have to add them again.
Flash Firmware we try to provide the best and latest flash files and firmwares, But we do not guarantee the accuracy or compatibility of any of the files. So use them at your own risk!.