Nokia C2-03 Insert sim ways problem solution jumpers
Nokia C2-03 insert sim problem, Sim is not working in Nokia C2-03, Sim is not Valid, Single Sim is not working in Nokia C2-03
Nokia T4 and T5 key, Electronic meter, Electronics Cleaner, Hot Air, Solding Iron, Jumper Wire.
Diagnostic and Solutions.
if sim is not working in Nokia C2-03 is can be cause of water damage or missing components. Use different sim and if sim is not working then de assemble Nokia C2-03.
Once Mobile phone is disassemble check all these parts that are given in above diagram and apply electronics cleaner. Apply hot air so that it can be dry but not to much because it can damage the mother board or may can harm your skin.
these different color lines are indicating different path and tracks that are used in sim function in Nokia C2-03 so if nay of them is missing apply that jumper as shown in diagram to solve insert sim problem in Nokia C2-03
If single sim is not working out of these two you can only jumper those parts that are used by it. And to find prints and track you can see above diagram.
Do not apply to much heat it can damage the mother board and harm your skin.
When apply jumpers make sure the do not be ground with other prints.It can short the mobile phone.
Remove Sim Ic with hot air because with Solding iron it might can damage prints also.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.
to get new repairing cellphone diagrams and applications with email “Enter your email address for RSS:” at the right side at top and press “subscribe”