Nokia Asha 200 Short Solution Shortage Problem
Nokia Asha 200 Matot / Short, this morning at 10:00 we get a phone Asha 200 whose condition does not have lives at all, aka Matot, and the position of the phone Asha 200 Full Short no tolerance anymore, if this problem because bluetooth ic or even Ic his PA? No, the problem is not penyebap two ic but next Vbat Resistor Ic PA, still has something to do with Ic PA, but not including his PA Ic, but Capacitornya alone.
The way to fix it, so of course if Capacitor Vbat Asha 200 Short solution only in the locker, could not be replaced, the phone can also live and spend the signal, even if the phone Asha 200 is alive and issuing sinya, but not to communicate, the problem of signal Weak on the phone, in that direction because of Capacitor Vbat to the PA is not in pairs / no.
Well it’s good you replace it using Capacitor Other / other carcasses, can you get on the phone X2-00 C3-00 X2-01 DLL Capacitornya exactly like the original, and the location / position Capacitor is not far from Ic PA, that in Schema we point out below examples Capacitor layout on the phone right next to Ic X2-00 PA, you can see clearly for example, please open below.
Then once you’ve got / find the location Capacitor, you just use the blowers off, if there is no Solder Blower can also, then you plug in the phone Asha 200 Matot earlier, and then you try to turn it on and test for phone, 100% guaranteed Work signal, which previously Not work phone now works as before.
Good luck, I hope you managed to fix it as well / the same as we’ve managed to do it, as long as the problem is exactly the same point as we review here, the position of the phone Matot / total dead, and if in check using Power Supply and Multi Tester Full direct voltage. Thank you.