Nokia 6600s slide solution for charger not supported error
Nokia 6600s slide solution for charger not supported error
Here is the solution for Nokia 6660 slide that shows ” charger not supported ” when the battery is plug-in. This solution may work if after checking the firmware of the device is correct or already tried the flash update.
You can refer to the proposed solution below , you can also first try to use another charger work and replace the phones battery . If the problem persists locate the components highlighted on 6600 PCB board .
The BTEMP ( temperature batteyr ) 47K resistor which is mounted near the battery connector , if said components is defective, it will mean the charger is not supported on Nokia 6600 slide . Replacing it could only solve the problem. If the above solution does not work, the next possible cause of the problem is the IC power , this component is connected directly to it.
