Nokia 6600s slide LCD Display Problem Repair Solution
Solution Nokia 6600s slide LCD Display Problem Repair
The Nokia 6600 slide is another solution to the problem of viewing the screen as black or white, saturated or garbled screen. White blue screen and LCD
(liquid crystal display) screen problem can be fixed by updating the firmware flash and sometimes it is because of a defective components.
You can check the solution below and follow some procedures on how to solve this type of problem with the LCD screen if the device suffered occurred when
wet damaged or accidentally dropped sharply.
Repair Tips for Nokia 6600 slide problem the LCD display:
1 Buy lcd screen replacements for damaged or broken LCD screen and replace.
Check the flex cable lcd, make sure the ribbon cable is properly attached to the connector.
Replace the set of ribbon cable assemblies if damaged.
2 blank screen and blue screen, try to restore and update the firmware flash device to any latest version available.
3 Check the LCD pin connector, replace if damaged, clean it if there is an accumulation oxidation found.
4. illegible, replace the screen saturated Display EMI-ESD filter IC.
Failure 5. dark screen or black screen this can often cause the white light of the LED LCD screen, only see how to solve the nokia 6600 slide LCD backlight