Nokia 6600 Slider Charger no response – No charge Solution
Nokia 6600 Charger no response – No charge Solution
Here is the Nokia 6600 slide solution for not charging problem such as charger no response when the battery charger is inserted or plug-in. This solution shows the paths connecting line circuit protection of load on Nokia 6600 slide PCB board .
To solve a problem of load does not respond, you can first try to use another charger work, then also replace the phones battery . Then refer to the solution below if the problem persists.
First, check the charging pin connector for possible damaged , replace if necessary . Clean the contact terminal [ ads on the circuit board of the spindle load . Check or replace fuse and diode chip .
If the problem persists, rework or replace the charge IC (Betty) .
For false or load it shows charging indication but it was not registered or recorded on the battery. This problem is also caused sometimes by BETTY IC .