Nokia 2690 Charger Not Supported Problem Solution Ways Jumpers.

Posted in Nokia, Nokia 2690 with , , , , , on July 2, 2011

if you are having a problem with your cellphone nokia 2690 when ever you plug in charger into its charging pin it shows charger not supported.this can be the fault of a 47k resistance that is shwon in cellphone diagram bellow.
you have to change this resistance and before replacing this 47k resistanse you can clean resold this resistance and area.

you can use it from most of nokia mobiles like nokia 1110,nokia 1112,nokia 1200,nokia 1208,nokia 6030 etc.
this resistance is used in all nokia mobile phones with same 47k value so you can use it from any of nokia mobile just position of resistance can be different in each mobile.
for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

to get new repairing cellphone diagrams and applications with email “Enter your email address for RSS:” at the right side at top and press “subscribe”

Be Sociable, Share!
Be Sociable, Share!

Incoming search terms:

nokia 2690 network problem

2690 charger not supported jumper

2690 charging ic jumper

nokia 2690 charger not supported problem

nokia 5130 charger not supported jumper

nokia 2690 charging not store

nokia 1208 charging not supported

nokia 2690 network problem solution

nokia 1209 charger not supported

nokia c1-01 charger not supported solution

Disclaimer.We are not affiliate with cell phone companies like Nokia,Samsung,Sony Ericsson,Lg,Motorolo and some other etc Manufacturers / Vendors .All trademarks are the property of the respective trademark owners.we just provide diagrams for study and repairing purpose.these images are uploaded by website we will not be responsible for any loss or damage, including personal injury.for more detail read Terms & Conditions and Privacy & Policies at bottom.

Restore Hard reset will set your phone in origional factorry settings. It will remove all the data and apps that you installed. Your contacts will be removed and you have to add them again.

Flash Firmware we try to provide the best and latest flash files and firmwares, But we do not guarantee the accuracy or compatibility of any of the files. So use them at your own risk!.

Comments are closed.