Nokia 110 LCD No Lighting Solutions
Nokia 110 is not issued in because the lights can Lcd break point / even be because the phone is problematic Light emitting diode sehingganya no longer able to remove the lamp for the 110 mobile phones, these problems because one of the two points above problems.
1 The first step you try to check first if the lamp voltage at jalaur number 2 two if from the right side, please check if there is voltage using a tester / nothing at all, if there is no voltage at all, it was a sign jalaur lights on the mobile experience break point, could be due to the exposure of the phone so that the path + lights broke, you can fix it in a way such as Schema jalaur jumper above in Step 2.
2 What if the first solution above is not able to fix the problem and it turns out the lamp voltage lines are there but not good so do not spend Lcd lights up the flame, you can use the number 2, namely by removing two diodes is in step No. 1 in the Schema, then do a jumper using Method No. 3 is in Schema above, that is by foot jumper directly to no2 lcd, lcd legs then you give the No. 3 lane Ground / Ground to the nearest jumper around the LCD, you can direct jumper No. 4 LCD feet to four feet because the LCD is also no four Ground.
In conclusion, no 2 way affect the keypad lights, but it does not matter because the LCD backlight will also highlight to the keypad so there is also an automatic keypad lights are not as bright as the original though, which is important can be used at night.