Nokia 110 Keypad 1 4 7 * Keys Not Working Solution
Nokia 110 Keypad 1 4 7 * Keys Not Working Solution.How to fix the problem on the phone keypad Nokia 110, 110 after the phone is exposed to water there are certain keys not working, and even then not another that does not work for sure key (4 * 17) of the downward path is not functioning at all.
If our current tester works well, sometimes people think that the problem is jalaur breaking, it is true in part technicians must tend to the broken lines, the problem is what? That’s because nokia phones in such a way sebelumnyapun permasalahanya breaking lines and to fix it we can do the jumper.
But if the problems on the Nokia 110 is not a problem because the path breaking current / voltage out when tested using a multitester, and when breaking lines in the test / check is not possible to use a multitester voltage / out there, it is in the call path breaking.
Now it’s time you switch the Nokia phone’s tendency Newest Model, the keypad would not work because there is one of the components / resistors Short / broken in because the water exposed to moldy, now therefore please your drain / clear the phone immediately after you hit the water and do you plug before you drain the battery until the phone is completely dry.
Nokia 110 keypad problem solution, the solution is to be rid of the resistor Yanga at the bottom of the temple lamp, so that you can meliha Schema details listed above there has been in complete instructions and resistors which need to be removed so that the keypad can function returned to normal.
Hopefully this time the solution is really helpful and can help your workers mobile service service, we just can share through the site “ISP CELL” is, good luck good luck the problem.