Nokia 101 Mic Problem Jumpers Ways Solution.

Posted in Nokia, Nokia 101 with , , , , , , on January 24, 2012

If nokia 101 mic is not working or sending low voice to the destination then you can solve mic problem with these few steps that are given bellow in diagram. look at the diagram and do following steps step by step.

In pictures you can see two main colors blue and red these colors are identifying outer and inner points of mic.outer is a ground point of mic while inner is a + point of mic. remove the old mic from board and then check the path as shown in diagram jumper new mic with these parts and if parts are also broken due to water damage then big round points are identifying locations where you can apply jumper and these are test points for mic problem in nokia 101, see some points can also be scratched. So scratch them slightly and make jumper at that point.

for more detail and new tips and tricks about cellphone service problem keep visiting this page we will update cellphone service diagrams timely with new cellphone diagrams.some related post are also given bellow you can read them also for more information about cellphone.

to get new repairing cellphone diagrams and applications with email “Enter your email address for RSS:” at the right side at top and press “subscribe”

Be Sociable, Share!
Be Sociable, Share!

Incoming search terms:

nokia 101 mic ways

Nokia 101 Mic problem

nokia 101 mic

nokia 101 dead set solution

nokia 101 mic way

nokia 101 mic jumper solution


101 mic ways

nokia 101 mic not working

nokia 100 network ic jumper

Disclaimer.We are not affiliate with cell phone companies like Nokia,Samsung,Sony Ericsson,Lg,Motorolo and some other etc Manufacturers / Vendors .All trademarks are the property of the respective trademark owners.we just provide diagrams for study and repairing purpose.these images are uploaded by website we will not be responsible for any loss or damage, including personal injury.for more detail read Terms & Conditions and Privacy & Policies at bottom.

Restore Hard reset will set your phone in origional factorry settings. It will remove all the data and apps that you installed. Your contacts will be removed and you have to add them again.

Flash Firmware we try to provide the best and latest flash files and firmwares, But we do not guarantee the accuracy or compatibility of any of the files. So use them at your own risk!.

Comments are closed.