iPhone 7 Usb Charging Problem Solution Jumper Ways

Posted in Iphone with , , , , on January 12, 2017

iPhone 7 Usb Charging Problem Solution Jumper Ways

Issue:-
IPhone 7 usb charge solution,
Unrecognized IPhone 7 USB not detected

Diagnosis: –
Plug the USB cable into the PC and the telephone jack, read the notifications on the screen phone recognized or not. Verify that you can save data to the memory card or not. Replace the USB data cable and try again.

iPhone 7 Usb Charging Problem Solution Jumper Ways

iPhone 7 Usb Charging Problem Solution Jumper Ways


Replace the Usb charger and try again can charge or not.

Solution:-
If you are facing the problem of loading iPhone 7 and have proof of all the above steps to solve this problem on it. Dismount the phone and then look at the phone for water and carbon damage. Have it cleaned with an electronic cleaner and apply heat with a heat gun to dry it.

Keep in mind that the heat should not be over and over again as it can damage your skin and damage the motherboard. So keep it in normal flow and look at the parts carefully.

Track all of these routes and components as shown in the diagram above. All these tracks are given in different colors so you can easily figure out the shapes of the bridge.

Therefore, if you experience a charging problem or a problem connecting your Samsung GT-I9500 to your computer via a USB cable, your iPhone 7 charge connector may be defective. Replacing it with a new one is the only solution here. But if by chance the USB connector is broken, then you have to make the jumpers as shown in the previous diagram

The charge connector pins may be damaged, corrosive or dusty.
The charger is out of order or not original. The battery may be defective or copied.
Battery terminals may be corrosive or damaged.
To solve the problem, you must first make sure that the wall charger you are using is working properly and the battery is not completely drained. Continue to inspect the plug of the charging plug or the DC connector, visually check for damage. Clean the charging pads on the PCB card and the battery connector. If the problem persists, continue troubleshooting the components.

If the above procedures do not solve the load problem, the possible failure is the power IC. Redo or replace if necessary.

iPhone 7,Usb,Charging,Problem,Solution,Jumper,Ways

iPhone 7, usb not charging, Usb not recognized, charging not save, not charging

Be Sociable, Share!
Be Sociable, Share!

Disclaimer.We are not affiliate with cell phone companies like Nokia,Samsung,Sony Ericsson,Lg,Motorolo and some other etc Manufacturers / Vendors .All trademarks are the property of the respective trademark owners.we just provide diagrams for study and repairing purpose.these images are uploaded by website visitors.so we will not be responsible for any loss or damage, including personal injury.for more detail read Terms & Conditions and Privacy & Policies at bottom.

Restore Hard reset will set your phone in origional factorry settings. It will remove all the data and apps that you installed. Your contacts will be removed and you have to add them again.

Flash Firmware we try to provide the best and latest flash files and firmwares, But we do not guarantee the accuracy or compatibility of any of the files. So use them at your own risk!.