Huawei Y5 II Charging Solution
Huawei Y5 II Charging Solution Jumper Problem Ways Charging Not Supported
The load problem on Huawei Y5 II may be due to broken load bolt damage and due to water damage. In case of charging the problem the mobile can not save power on battery and can show the false charge on it.in charging false condition you can only see charge Signe on mobile, but it will not save any electric power on it.
Huawei Y5 II Charging solution Bridge problem Charging problems Not supported
After mobile phone disassamply you have to do some steps as shown in above diagram.check charging the cat and your points make them hae good value if yes then change chager and check it and if the charging points on the card Mother do not prove accourate the value with Meter then you hae check all the parts and clues that are given in the diagram of Huawei Y5 II.
Look at the mother table carefully vary if there is any rust or carbon and water damage or can any component is damage. If any clue fails to apply the jumpers as given and if any part is damaged or broken then replace with a new one.
For more information and new tips and tricks about this troubleshooting continue visiting this page we will update if there will be new updates. Some related messages are also given below you can read more about the mobile phone.
Please note that although each diagram and solution posted on our website has been tested by one or more members of our team prior to publication, we will not be liable for any loss or damage, including personal injury.