How to Fix Samsung GT-S3310 Keypad problematic
How to Fix Samsung GT-S3310 Keypad problematic Here’s the solution fixes the problem samsung gt-S3310 keypad not working, HP Samsung S3310 has a type IC driver for his work on the principle of mensupport Keytone in his translation process to the CPU and MCU, basically a lot of damage caused by a broken IC Keypad. but before you do the repair by replacing the keypad IC please follow the steps below
minor: 1. Clean keytone / polydum hp from all the dirt (rich wkwkw what aja ya). dirt here is not shit yeah, I mean the fear in there keytone corrosion caused by sweat, Corrosion etc., clean with alcohol or tiner, I suggest using thiner. 2. Open keytone and replace if already exists cans buttons are not back yet / soft keypad which can cause a short in the sense attached directly without you press the keypad. 3. Chek connection Wire / Flexible keytone could have been peeling and short wire on the ground. 4. Try replacing it with a new keytone before sillahkan do with ohm meter measurements at each point keytone button. 5. Replace the IC located in the D500. TQ. Miscellaneous solutions: Jumper Keypad Samsung GT-S3310i