here is the way to jumper and short keypad ic in Sony Ericsson W810i.so we can say it is helpful for how to solve keypad problem in Sony Ericsson without keypad ic. this will help you to solve key pad problem without ic make jumpers as shown in this diagram as mentioned and indicated with red lin
if you have power switch button on off problem in sony ericsson w800i then here is a diagram that will help you to solve this problem in first stem remove the old power switch button form board and then check prints two of them are ground and other two are going to this transistor so this will h
Sony Ericsson W800i Keypad Light Led problem solution Ways.Sony Ericsson W800i Keypad Light Led problem solution Ways.
if key pad light is not working in Sony Ericsson W800i then may this diagram help you to solve your problem.make jumpers as given in diagram and it will pass crunt from board to the keypad board. you can see we have made a jumper and also remove one led from key pad board so make as i have don pl
if you are in trubble that how to solve Sony Ericsson W800i lcd light problem then today i am going to post a new thread that your problem can be solved with help of this diagram so look at this diagram and make jumpers as shown in this diagram.make two jumpers form board to the lcd and it will s
this is diagram to tell you how to short charging ic in Sony Ericsson W800i to solve charging problem.remove crystal ic near charging base as given in diagram and make jumpers as given in diagram attached in this post. there is also a second diagram attached to solve the same charging problem so
here is a new diagram to solve charging problem in Sony Ericsson W800i.you can see there are two links in diagram one is used for ground and the other one is for second pin of charger and charging jack in Sony Ericsson W800i.so make these two jumpers if there is charging and not charging problem in
this is diagram to solve insert sim problem in Sony Ericsson W800i all the links are shown clearly with red line indications.so one print is ground and the other four are mentioned on diagram with red color lines.one print is empty and it is not used in sim problem.so carefully check these links