Nokia 6030 On Off Switch Power Button Problem Jumpers Ways.

Nokia 6030 On Off Switch Power Button Problem Jumpers Ways.

Nokia 6030 On Off Switch Power Button Problem Jumpers Ways. this is a diagram in it we can see that if on off switch prints are broken or damage how to make jumper.a simply jumper can be look easily in this diagram and it is working 100%. for more detail and new tips and tricks about this

TAGS: , , , , ,

Advertisement Links
Nokia 6030 Short or Dead due to bad charger solution problem.

Nokia 6030 Short or Dead due to bad charger solution problem.

if Nokia 6030 got dead due to bad charger or show full short due to bad charger then here is a new diagram to solve this problem simply change this resistance with new on or replace with any other same resistance and i hope it will be solve.check these parts and also check the charging area and

Nokia 6030 display jack jumpers ways track problem solution.

Nokia 6030 display jack jumpers ways track problem solution.

this diagram is to solve display problem jumpers in case that lcd jack and prints are broken and damaged.if lcd jack prints are damaged then what to do? do not worry and take a look at the diagram attached with this post and scratch area from front side and also from back side of the board as sho

TAGS: , , , , , , , ,

Nokia 6030 lcd ways jumpers track lcd prints broken damaged.

Nokia 6030 lcd ways jumpers track lcd prints broken damaged.

if lcd prints and links are damaged or broken in nokia 6030 this diagram will solve all your display problems in nokia 6030.simply make these jumpers and check all these links with a meter.this diagram can help you even lcd jack is damage also. there is a single print that can not be find so if i

TAGS: , , , , , , , ,

Nokia 6030 Display Problem Jumper solution

Nokia 6030 Display Problem Jumper solution

Nokia 6030 Display Problem Jumper solution is possible with this usefull diagram its to sensitive but can be solved with a little bit hard work.in diagram there are two main parts are shown erase the upper coding of board but try that the inner pad do not damage again.make jumpers as shown carefully

TAGS: , , , , , , , ,

    1 pages