BlackBerry Curve 9220 Not Charging Problem Solution
BlackBerry Curve 9220 Not Charging Problem Solution Blackberry 9320 and 9220 lines Disconnect Charging, so what if the track breaking up, scrape hard dong dong anniversary added ngerjainnya, Just replace the connector should be, it should find its path and make the jumper, so that the phone can be charging again, this is not difficult for kerjakannya , mkenurut if we do not, the problem is we just do the jumper it directly to the charging connector directly before in pairs.
Once installed jumper cables on the battery connector then just plug it to the PCB, do not need to use a blower simply by using Solder course not, indeed if memjasang phone charging connectors 9320 and 9220 must be used to remove enough solder connectors are using the blower, the problem that way Blower mounting we use well then we want to attach the connector will be damaged even if we put it on the bottom of the PCB still can not.
So step one should only be installed using hard solder such that the legs attach to the charging connector lines then you can do the jumper as above, then the way the connectors will be more simple.
This problem can not be resolved by dismantling and installing the connector using the blower, the other as if the other blackberry phones, one of them is the Blackberry 8520, you can dismantle it and install using the blower, even if the foot is on the PCB connector that broke the phone, you can install first jumper cable to the phone connector, then you plug the connector into the connector PCB place, then you do the jumper to which part is broke and directed / fetch another track later in the solder.
If it were 9320 9220 yes this is more easily installed jumper cable to the connector and then once completed attach the jumper cable to the connector on the Charging and Charging jumperkan to the path that is in Sechema above, okay good luck hopefully can help you.