BlackBerry Curve 8520 Shortage Solution
BlackBerry Curve 8520 Shortage Solution blackberry 8520 Matot / short, with a state of total dead cell phone and direct voltage rises from 30 to 32 if the check on the power supply, do not get them we just misjudged enough already misjudged, previously we also have to remove ic powe, finally we reprint and plug it again, from the incident we understand that not only power ic ic PA DLL that can make phone Matot / short.
But in because the resistor also blackberry phone can be short so that the total dead, and if in check in the power supply voltage direct up to 30/32, if the position of the normal mobile originated voltage of 4/5 and so on.
Well the solution to overcome these problems, please open the cover ic RF / PA that is located below the left side of the battery connector, and you check the power supply let alone use the power supply is still running, then you touch in the RF ic or resistor located on the right side RF ic, if you please replace the heat resistor lain.Penyakit lost any solution at hand, and it’s time to share the publick.
We believe that the problems of the mobile phone as we have said above, check if the power supply voltage using a straight up 30/32, illness in the two resistors.
Good luck success is in your hands.