Blackberry 9790 Ringer Buzzer Solution Jumper Ways
Onyx 3 Buzzer Not Working, Blackberry 9790 Onyx 3 Buzzer Solution, not another problem that was caused by cell phone blackberry 9790 can not issue a ringing sound, because the two positive factors that made him unable to issue a ringing sound, which is the main factor, the buzzer damaged / broken, to two factors, namely, the path / blackberry 9790 buzzer dropping resistor, a solution of two permasalahn can be solved using the following ways.
How to fix a buzzer 9790, how to fix it, you can do the demolition of the mobile phone buzzer, then look for the buzzer cable which broke and must be reconnected using solder, but if you do not want to elaborate / painstakingly repairing the buzzer, you can replace it with new buzzer, please find / buy new & original buzzer, so that after the buzzer sound can be installed properly / as before.
Buzzer Jumper Way Path Bklackberry 9790, how to do research in advance / checks at the buzzer path, if there is a path-breaking one in between the two lanes of the buzzer, if it is yes, you can make jumpers, between foot buzzer on the PCB to lane buzzer still flows out / not broken.
Then, if there is one resistor buzzer blackberry 9790 that damaged / broken, you can replace it using another phone carcass buzzer resistors, all resistors buzzer at any time provided that you actually take to replace the original resistor resistor buzzer from other carcasses, then if you do not have another buzzer resistor or carcass of another, you can use the jumper.
The way the jumper resistor 9790 Buzzer, please loose / remove resistor buzzer, buzzer one resistor which broke and all you have to fix in between the two resistors buzzer, you just waste / remove resistor buzzer and then do a jumper, between the legs of the resistor to foot resistors, resistors for foot to foot jumper resistors if you do not understand, for more details please go to Schema above. Good luck good luck.